Frigidaire CAD704TDD3 Dehumidifier Manual

The Frigidaire CAD704TDD3 is a high-capacity 70-pint dehumidifier designed for residential use, featuring electronic controls, automatic humidity sensing, continuous drain capability, washable air filter, auto-restart, and a 24-hour timer. It operates on 115V AC, 60Hz, and is ideal for basements, living areas, and other spaces up to 4500 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Draining Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Humidity sensor, Water collection bucket with full-bucket alert, Continuous drain hose port, Washable air filter, Casters for mobility, and Auto-defrost function.

Feature	Description
Electronic Controls	Digital display with touchpad for humidity setpoint and mode selection
Humidity Sensor	Automatically monitors and maintains desired humidity level (35%-85% RH)
Water Bucket	Removable 15.5-pint bucket with handle and full indicator
Continuous Drain	Port for connecting 5/8" ID garden hose (not included)
Washable Filter	Front-access filter for easy cleaning
Auto Restart	Resumes previous settings after a power interruption
24-Hour Timer	Programmable on/off schedule
Auto Defrost	Prevents coil freezing in low temperatures
Fan Speed Control	High/Low settings for noise and efficiency adjustment
Bucket Full Alert	Audible beep and flashing light when bucket needs emptying

Installation & Placement

Unpack and inspect contents. Place on level, stable floor.

Clear area: Ensure at least 12 inches of clearance on all sides for proper airflow.
Check level: Unit must be level for bucket to seat properly and for internal pump (if equipped).
Connect drain hose (optional): Attach 5/8" ID hose to drain port for continuous drainage.
Plug into grounded 115V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure room temperature is between 41°F (5°C) and 95°F (35°C) for optimal operation.

First-Time Setup

Plug in unit; control panel will illuminate.

Set desired humidity: Press HUMIDITY SET button, then UP/DOWN arrows to select level (45-50% recommended).
Select fan speed: Press FAN button to choose High (faster dehumidification) or Low (quieter).
Set timer (optional): Press TIMER button to program automatic start/stop times.
Check filter: Ensure air filter is clean and properly installed.

CAUTION! Handle bucket with care to avoid spills. Do not operate without filter installed.

Specifications

Model: Frigidaire CAD704TDD3
Dehumidification Capacity: 70 pints per day (at 60% RH, 80°F)
Coverage Area: Up to 4500 sq. ft. in moderate conditions
Bucket Capacity: 15.5 pints
Power Supply: 115V AC, 60Hz, 7.5A
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Noise Level: Approx. 51 dB on Low setting
Dimensions (HxWxD): 23.6" x 15.4" x 11.9"
Weight: 46.3 lbs
Refrigerant: R-410A

Controls and Settings

Control Panel: POWER button, HUMIDITY SET buttons, FAN speed button, TIMER button, FILTER CHECK indicator, BUCKET FULL indicator.

Display: Shows current room humidity, setpoint, timer status, filter alert, and bucket full alert.

Humidity Control: Set between 35% and 85% RH in 5% increments. Fan Speed: High for maximum moisture removal, Low for quiet operation. Timer: Programmable in 1-hour increments up to 24 hours. Filter Alert: Illuminates when filter needs cleaning (after 250 hours of operation).

Operation Modes

Normal Mode: Unit runs until set humidity is reached, then cycles on/off automatically. Continuous Mode: Press and hold HUMIDITY SET for 3 seconds to run continuously regardless of humidity. Laundry Mode: High fan speed for accelerated drying in laundry areas.

Press POWER to turn unit on.
Set desired humidity with UP/DOWN arrows.
Select fan speed as needed.
Unit will automatically maintain set humidity.

Tip: For maximum efficiency, keep doors and windows closed while dehumidifier is running.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean air filter every 2-4 weeks: Remove, wash with warm water and mild detergent, dry completely before reinstalling.
Empty water bucket regularly: When BUCKET FULL light flashes, remove bucket, pour out water, replace securely.
Clean exterior: Wipe with soft, damp cloth. Do not use harsh chemicals.
End-of-season cleaning: Run in fan-only mode for a few hours to dry internal components before storage.

WARNING! Always unplug unit before performing any maintenance. Never immerse unit in water.

Draining Options

Bucket Drainage: Standard method using removable bucket. Continuous Drainage: Connect hose to drain port for unattended operation.

For Continuous Drain: 1. Ensure unit is level or slightly tilted toward drain port. 2. Connect standard 5/8" ID garden hose to drain port. 3. Route hose to floor drain, sump pump, or suitable outlet. 4. Ensure hose has downward slope without kinks.

Care & Storage

When not in use for extended periods:

Unplug unit from outlet.
Empty and clean water bucket, allow to dry.
Clean air filter and let dry.
Coil drain hose (if attached) and store with unit.
Store in cool, dry place, protected from dust.

CAUTION! Do not store with water in bucket. Never place heavy objects on top of unit during storage.

Regulatory Information

UL Listed: Meets safety standards for household dehumidifiers. Energy Star Certified: Meets energy efficiency guidelines. EPA Refrigerant Compliance: Uses R-410A, an environmentally friendly refrigerant. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is fully inserted; test outlet with another device.
Little or no water collection	Low humidity/filter/temp	Check room humidity; clean filter; ensure room temp is above 41°F (5°C).
Bucket full light flashing but bucket empty	Bucket not seated properly	Remove and reinsert bucket firmly; check for obstructions.
Unusual noise	Loose parts/filter	Ensure filter is installed correctly; check for foreign objects; ensure unit is level.
Error code on display	Sensor/system fault	Unplug for 5 minutes, then restart. If persists, contact service.
Ice on coils	Low temperature	Auto-defrost should activate; move to warmer area if below 41°F (5°C).

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com