Frigidaire CAD704DUD13 Dehumidifier Manual

The Frigidaire CAD704DUD13 is a 70-pint dehumidifier designed for residential use, featuring electronic controls, automatic humidity sensing, continuous drainage option, washable air filter, auto-restart after power interruption, and a 24-hour timer. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, humidity sensor, 70-pint capacity water tank, washable filter, continuous drain port, casters for mobility.

Feature	Description
Electronic Controls	Digital display with touchpad for settings
Humidity Control	Adjustable from 35% to 85% relative humidity
Water Tank	70-pint capacity with full-tank indicator and auto-shutoff
Continuous Drain	Garden hose connection for continuous operation
Air Filter	Washable mesh filter for air purification
Auto-Restart	Resumes previous settings after power outage
24-Hour Timer	Programmable on/off cycles
Mobility	Four casters for easy room-to-room movement
Energy Efficiency	ENERGY STAR certified
Defrost Function	Automatic operation in low temperatures

Installation

Unpack and inspect contents. Place on level surface.

Position unit: Allow at least 12 inches clearance on all sides for proper airflow.
Install casters: Attach all four casters to bottom of unit.
Check filter: Ensure washable filter is properly installed.
Plug into grounded 120V AC outlet.

WARNING! Do not use extension cords. Ensure outlet is properly grounded.

First-Time Setup

Plug in unit; control panel will illuminate.

Set humidity level: Press HUMIDITY button to select desired level (45% recommended).
Select fan speed: Choose HIGH or LOW using FAN button.
Set timer (optional): Use TIMER button to program on/off cycles.
Check drainage: Install drain hose if using continuous drainage.

CAUTION! Do not operate in temperatures below 41°F (5°C).

Specifications

Capacity: 70 pints per day at 80°F, 60% RH.
Coverage Area: Up to 1,400 square feet.
Power Requirements: 115V, 60Hz, 6.5A.
Water Tank: 70-pint capacity with handle.
Air Flow: 165 CFM on high setting.
Operating Conditions: 41°F to 95°F (5°C to 35°C).
Noise Level: 51 dB on low setting.
Dimensions: 15.4" W × 11.4" D × 23.6" H.
Weight: 41.9 lbs.
Refrigerant: R-410A.

Controls and Settings

Control Panel: POWER, HUMIDITY, FAN, TIMER, FILTER RESET, CONTINUOUS.

Display Indicators: Current humidity, set point, fan speed, timer, filter alert, full tank, defrost.

Humidity Control: Adjust from 35% to 85% in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program 1-24 hours for automatic start/stop. Continuous Mode: Bypasses tank for direct drainage. Filter Reset: Resets filter maintenance reminder after cleaning.

Connecting Drainage

Two drainage options: Water tank or continuous drain.

Water tank: Empty when FULL indicator lights.
Continuous drain: Attach 5/8" ID garden hose to drain port.
Ensure hose runs downward without kinks.
Select CONTINUOUS mode on control panel.

Tip: For basement use, continuous drainage is recommended.

Operating Modes

Multiple operating modes for different needs.

Auto Mode: Maintains set humidity automatically.
Continuous Mode: Runs continuously until turned off.
Timer Mode: Runs for set hours then turns off.
Defrost Mode: Automatically activates in cold conditions.
Laundry Mode: Higher fan speed for drying areas.

WARNING! Do not block air intake or exhaust grilles.

Maintenance

Regular maintenance ensures optimal performance.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely.
Empty and clean tank monthly with mild detergent.
Clean exterior with damp cloth only.
Check drain hose for clogs if using continuous drainage.

Care & Cleaning

Unplug before cleaning. Use only damp cloth for exterior.

CAUTION! Do not use harsh chemicals, abrasives, or water spray on controls.

Regulatory Information

UL Listed. ENERGY STAR certified. FCC Part 15 compliant. This product contains refrigerant that must be recovered by certified technicians. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power issue/full tank	Check power connection; empty water tank; reset circuit breaker.
Poor moisture removal	Dirty filter/doors open	Clean air filter; close room doors/windows; check room temperature.
Water leakage	Tank not seated/hose leak	Ensure tank is properly installed; check hose connections.
Loud noise	Uneven surface/obstruction	Place on level surface; check for objects near fan.
Frost on coils	Low temperature	Defrost mode should activate automatically; raise room temperature.
Error codes on display	Sensor/system issue	Unplug for 10 minutes then restart; consult manual for specific codes.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com