Frigidaire CAD504DUL10 Dehumidifier Manual

The Frigidaire CAD504DUL10 is a 50-pint capacity dehumidifier designed for residential use, featuring automatic humidity control, continuous drain option, washable air filter, electronic controls with digital display, 24-hour timer, full bucket alert with auto shut-off, and energy-efficient operation. Ideal for medium to large rooms up to 3000 sq ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, removable water bucket, continuous drain hose connection, washable air filter, caster wheels, handle for portability.

FeatureDescription
Capacity50 pints per day (at 60°F, 60% RH)
Humidity ControlAutomatic with adjustable set point (35% - 85%)
Digital DisplayShows current humidity, settings, and alerts
Continuous DrainGarden hose connection for unattended operation
Air FilterWashable, removable filter for air quality
Timer24-hour programmable on/off timer
Bucket Full AlertIndicator light and auto shut-off when full
PortabilityFour caster wheels and carrying handle
Energy EfficiencyEnergy Star certified
Defrost FunctionAuto defrost in low temperature conditions

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

  1. Choose location: Place in center of room or area with high humidity, away from walls/furniture (minimum 12 inches clearance).
  2. Check level: Ensure unit is level for proper drainage.
  3. Install drain hose (optional): Attach standard garden hose to continuous drain port for permanent drainage.
  4. Plug into dedicated 115V AC outlet.

WARNING! Do not use extension cords. Ensure proper ventilation around unit. Keep away from heat sources.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

  1. Insert water bucket: Slide bucket into place until it clicks.
  2. Set humidity level: Press HUMIDITY button to set desired level (recommended 45-50%).
  3. Select fan speed: Choose LOW or HIGH fan setting.
  4. Set timer (optional): Program 24-hour on/off schedule.
  5. For continuous drain: Connect hose and select DRAIN mode.

CAUTION! Handle bucket with care to avoid spills. Ensure bucket is properly seated.

Specifications

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN SPEED, TIMER, FILTER RESET, CONTINUOUS DRAIN.

Display Indicators: Current humidity, set point, fan speed, timer status, filter alert, bucket full, defrost mode.

Humidity Control: Adjust between 35% and 85% in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Set 1-24 hours for automatic start/stop. Filter Reset: Press after cleaning filter. Continuous Drain: Enable when hose is connected.

Operating Modes

Normal Mode: Runs until set humidity is reached, then cycles on/off automatically. Continuous Mode: Runs constantly regardless of humidity (for very damp areas). Laundry Mode: High fan speed for faster drying of laundry in same room. Smart Dry: Automatically adjusts fan speed based on room conditions.

  1. Press POWER to turn on.
  2. Set desired humidity with HUMIDITY buttons.
  3. Select fan speed (HIGH/LOW).
  4. Unit will run until bucket is full or turned off.

Tip: Close windows and doors for most efficient operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Clean air filter: Remove and wash every 2 weeks or as needed.
  2. Empty water bucket: When full indicator lights, remove and empty bucket.
  3. Clean exterior: Wipe with damp cloth, then dry.
  4. Clean condenser coils: Use soft brush to remove dust every 3 months.
  5. Check drain hose: Ensure continuous drain hose is clear of obstructions.

WARNING! Always unplug unit before cleaning. Do not use harsh chemicals or abrasives.

Drainage Options

Bucket Drainage: Standard method, requires manual emptying. Continuous Drainage: Connect 5/8" garden hose to drain port for automatic drainage to floor drain or sink.

To set up continuous drain:

  1. Place unit higher than drain destination.
  2. Connect hose to drain port at back of unit.
  3. Select CONTINUOUS DRAIN mode on control panel.
  4. Ensure hose has downward slope without kinks.

Care & Storage

When not in use for extended periods:

  1. Unplug unit and empty water bucket completely.
  2. Clean air filter and let dry.
  3. Clean interior and exterior surfaces.
  4. Coil drain hose and store with unit.
  5. Store in cool, dry place covered to prevent dust accumulation.

CAUTION! Do not store with water in bucket. Store upright to prevent damage.

Regulatory Information

UL Listed: Meets safety standards for household dehumidifiers. Energy Star: Certified for energy efficiency. EPA Refrigerant: Uses R-410A, an environmentally friendly refrigerant. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit not runningPower issue/bucket fullCheck power cord connection; empty water bucket; reset circuit breaker.
Not removing moistureRoom temperature/filterEnsure room temp above 41°F; clean air filter; check humidity setting.
Water leakingBucket placement/hoseEnsure bucket properly seated; check drain hose connection; level unit.
Loud noiseVibration/obstructionPlace on level surface; check for objects touching unit; clean fan area.
Ice on coilsLow temperatureAuto defrost should activate; move to warmer area; ensure proper ventilation.
Filter light onDirty filterClean air filter; press FILTER RESET button.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-374-4432; www.frigidaire.com

Frigidaire CAD504DUL10 Dehumidifier Manual © - All Rights Reserved 2025