Frigidaire CAD504DUD16 Dehumidifier Manual

The Frigidaire CAD504DUD16 is a 50-pint capacity dehumidifier designed for medium to large rooms, featuring an Energy Star certification, digital humidity readout, continuous drain option, auto-restart, washable filter, and 24-hour timer. It operates on 115V/60Hz and includes adjustable humidity settings, full bucket alert, and easy-roll casters for mobility. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Digital control panel, 50-pint water bucket, washable air filter, continuous drain hose connection, casters, humidity sensor, and auto-defrost function.

Installation & Placement

Unpack and inspect contents. Ensure all parts are present and undamaged.

1. Place on level floor: Position on a flat, stable surface away from walls and furniture for proper airflow.
2. Check clearance: Allow at least 12 inches of space on all sides, especially air intake and exhaust.
3. Install casters: Attach four casters to bottom of unit (if not pre-installed).
4. Position near drain: If using continuous drain, place within 5 feet of floor drain or sink.
5. Plug into outlet: Use a dedicated 115V grounded outlet; avoid extension cords.

WARNING! Do not place in areas below 41°F (5°C) to prevent coil freezing. Keep away from heat sources and direct sunlight.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

1. Insert water bucket: Slide bucket into front compartment until it clicks into place.
2. Set humidity level: Press HUMIDITY SET button to desired level (35%-85% RH).
3. Select fan speed: Choose LOW or HIGH fan setting for desired airflow.
4. Enable continuous drain (optional): Connect 5/8" inner diameter hose to drain port and route to floor drain.
5. Start operation: Press POWER to begin dehumidifying.

CAUTION! Ensure bucket is properly seated to prevent leaks. Do not operate without filter installed.

Specifications

• Model: CAD504DUD16
• Dehumidification Capacity: 50 pints/day (at 60°F, 60% RH)
• Power Supply: 115V AC, 60Hz
• Amperage: 5.0A
• Water Bucket Capacity: 1.6 gallons
• Operating Temperature Range: 41°F to 95°F (5°C to 35°C)
• Air Flow (CFM): 165 CFM at high speed
• Noise Level: 51 dB on low setting
• Dimensions (HxWxD): 23.6" x 15.4" x 11.4"
• Weight: 41.9 lbs
• Refrigerant: R410A

Controls and Settings

Access all functions via digital control panel on top of unit.

Control Panel: POWER, HUMIDITY SET (+/-), FAN SPEED (LOW/HIGH), TIMER (1-24 hours), FILTER ALERT indicator, FULL BUCKET indicator.

Humidity Control: Set desired humidity level from 35% to 85% in 5% increments. Fan Speed: LOW for quiet operation, HIGH for maximum moisture removal. Timer: Program unit to turn on/off automatically within 24-hour period. Filter Alert: Light illuminates when filter needs cleaning. Full Bucket: Light illuminates and unit shuts off when bucket needs emptying.

Operating Modes

Normal Mode: Runs continuously until desired humidity is reached, then cycles on/off to maintain setting. Continuous Mode: Runs continuously regardless of humidity level (press and hold HUMIDITY SET for 3 seconds). Laundry Mode: Increases fan speed for faster drying in laundry areas. Auto-Defrost Mode: Automatically activates when coil temperature drops below 41°F.

1. Select mode via control panel.
2. Monitor current humidity on digital display.
3. Adjust settings as needed for comfort and efficiency.

Tip: For energy savings, set humidity between 45-50% for most living spaces.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean air filter: Remove filter every 2 weeks, wash with warm water and mild detergent, air dry completely before reinstalling.
2. Empty water bucket: When FULL indicator lights, remove bucket, pour out water, and replace securely.
3. Clean exterior: Unplug unit, wipe with damp cloth; never use harsh chemicals or abrasives.
4. Clean condenser coils: Use soft brush attachment on vacuum cleaner every 3 months.
5. End-of-season storage: Empty bucket completely, clean filter, coil and interior, cover unit and store upright in dry location.

WARNING! Always unplug before cleaning. Do not immerse unit in water.

Drainage Options

Bucket Drainage: Standard method; manually empty when full. Continuous Drainage: Connect hose to drain port for automatic draining.

Continuous Drain Setup:

1. Turn off and unplug unit.
2. Remove drain plug from back of unit.
3. Connect 5/8" ID hose (not included) to drain port.
4. Route hose to floor drain, ensuring downward slope.
5. Replace bucket (required for proper operation even with hose connected).

CAUTION! Ensure hose is not kinked or blocked. Check connection periodically for leaks.

Safety Features

Auto Shut-off: Activates when bucket is full or improperly seated. Tip-over Switch: Turns unit off if tipped beyond 45 degrees. Overload Protection: Circuit breaker protects compressor from electrical overload. Child Lock: Press and hold TIMER and FAN buttons simultaneously for 3 seconds to lock controls.

Regulatory Information

UL Listed: Meets safety standards of Underwriters Laboratories. Energy Star: Certified for energy efficiency. FCC Part 15: Complies with interference limits. California Proposition 65 Warning: This product contains chemicals known to cause cancer and birth defects. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains R410A refrigerant; dispose of properly according to local regulations.

Troubleshooting

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com