Frigidaire CAD304NUL10 Dehumidifier Manual

The Frigidaire CAD304NUL10 is a 30-pint capacity dehumidifier designed for residential use, featuring electronic controls, auto-restart, continuous drain option, washable filter, and low-temperature operation capability. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, removable bucket with full-bucket alert, continuous drain hose connection, washable air filter, and caster wheels for mobility.

Feature	Description
Capacity	30 pints per day (at 80°F, 60% RH)
Control Panel	Electronic with digital display
Auto Restart	Resumes previous settings after power interruption
Continuous Drain	Option for hose connection (hose not included)
Washable Filter	Removable filter for easy cleaning
Low Temp Operation	Operates down to 41°F (5°C)
Bucket Full Alert	Light and audible signal when bucket is full
Humidistat	Adjustable humidity level control
Timer	24-hour programmable on/off timer
Power Cord	6-foot cord with storage wrap

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Remove all packaging materials and tape.
Position unit: Allow at least 12-18 inches of clearance on all sides for proper airflow.
Check filter: Ensure washable filter is properly installed.
Level surface: Ensure unit is level for proper bucket operation.
Power connection: Plug into dedicated 115V AC, 60Hz outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; follow control panel prompts.

Initial power: Plug in unit; control panel will illuminate.
Set humidity level: Press HUMIDITY button to select desired RH level (35%-85%).
Select fan speed: Choose LOW or HIGH fan setting.
Set timer (optional): Program 24-hour on/off schedule if desired.
Bucket check: Ensure bucket is properly seated and empty.

CAUTION! Handle with care when moving; use two people if necessary due to weight.

Specifications

Model: CAD304NUL10
Capacity: 30 pints per day (AHAM verified at 80°F/60% RH)
Power Source: 115V AC, 60Hz, 4.5 Amps
Water Removal: 1.8 pints per kWh
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Noise Level: 51 dB on low setting
Tank Capacity: 1.8 gallon (6.8 liter) removable bucket
Air Flow: 165 CFM on high setting
Dimensions: 15.4" W × 11.4" D × 19.7" H
Weight: 33.5 lbs

Controls and Settings

Access all functions via electronic control panel. Front Panel: POWER, HUMIDITY SET, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, set point, fan speed, timer status, filter alert, bucket full.

Humidity Control: Adjust between 35%-85% RH in 5% increments. Fan Speed: LOW for quiet operation, HIGH for maximum moisture removal. Timer: Program 24-hour schedule for automatic operation. Filter Reset: Press after cleaning filter to reset alert. Continuous Drain: Connect hose to rear port for automatic drainage.

Operation Modes

Standard, Continuous, and Laundry drying modes available.

Standard Mode: Unit runs until set humidity is reached, then cycles on/off.
Continuous Mode: Runs continuously regardless of humidity level.
Laundry Mode: Runs at maximum setting for 6 hours to dry laundry areas.
Auto Defrost: Automatically activates in low temperatures to prevent coil freezing.

Tip: Use Continuous mode in very damp conditions or when using drain hose.

Maintenance & Cleaning

Unplug before any maintenance. Regular maintenance ensures optimal performance.

Bucket Cleaning: Empty regularly; clean with mild detergent monthly.
Filter Cleaning: Remove and wash filter every 2-4 weeks depending on use.
Exterior Cleaning: Wipe with damp cloth; never use harsh chemicals.
Coil Inspection: Check evaporator coil annually for dust buildup.
Storage: Empty completely, clean, and store in dry location if not using.

CAUTION! Never operate without filter installed. Do not immerse unit in water.

Drainage Options

Bucket collection or continuous drain hose (hose not included).

Bucket Method: Unit stops when bucket is full (indicator lights).
Continuous Drain: Connect 5/8" ID hose to rear port; ensure downward slope.
Gravity Drain: Place unit higher than drain location for proper flow.
Drain Hose Length: Maximum recommended 10 feet for proper drainage.

WARNING! Ensure hose is securely attached to prevent leaks. Check hose regularly for kinks.

Regulatory Information

UL Listed; meets U.S. safety standards. Energy Star certified for energy efficiency. EPA refrigerant type: R-410A. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432. One-year limited warranty on parts and labor.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power/bucket full	Check power connection; empty bucket; ensure bucket properly seated.
Low moisture removal	Filter/door/windows	Clean filter; close room doors and windows; check room temperature.
Water leakage	Bucket/hose connection	Ensure bucket properly installed; check hose connections for tight fit.
Loud noise	Placement/vibration	Ensure unit is level; check for loose parts; move away from walls.
Ice on coils	Low temperature	Auto defrost should activate; if persistent, raise room temperature.
Display not working	Power/reset	Unplug for 5 minutes then restart; check outlet with another device.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com