Frigidaire CAD301NUD11 Dehumidifier Manual

The Frigidaire CAD301NUD11 is a 30-pint capacity dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features an Energy Star certification, digital humidity readout, continuous drain option, auto-restart, washable filter, and customizable humidity settings from 35% to 85%. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Digital control panel, Water tank with full indicator and handle, Washable air filter, Continuous drain hose connection, Casters for mobility.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Remove all packaging materials and tape from the unit.
2. Place the dehumidifier on a level floor at least 12 inches from walls and furniture for proper airflow.
3. Ensure the room temperature is between 41°F (5°C) and 95°F (35°C) for optimal operation.
4. For continuous drainage: Attach the drain hose to the drain port at the back and route to a floor drain or suitable outlet.

WARNING! Do not use in confined spaces or near heat sources. Ensure the power cord is not pinched or damaged.

First-Time Setup

Plug into a dedicated 115V AC outlet; follow initial setup steps.

1. Insert the water tank securely into its compartment until it clicks.
2. Plug the power cord directly into a grounded wall outlet.
3. Press the POWER button to turn on the unit.
4. Set desired humidity level using the UP/DOWN buttons (35%-85% RH).
5. Select fan speed (High or Low) based on dehumidification needs.
6. For continuous operation, attach drain hose and set control to "Continuous" mode.

CAUTION! Allow the unit to sit upright for at least 24 hours if it was tilted during transport.

Specifications

• Model: CAD301NUD11
• Dehumidification Capacity: 30 pints/day (at 80°F, 60% RH)
• Recommended Room Size: Up to 1500 sq. ft.
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Water Tank Capacity: 1.8 gallons (6.8 liters)
• Power Supply: 115V, 60Hz, 3.7 Amps
• Air Flow: 165 CFM (High Speed)
• Noise Level: 51 dB (Low Speed)
• Certifications: Energy Star, ETL Listed
• Dimensions (HxWxD): 19.6" x 15.4" x 11.0"
• Weight: 36.4 lbs

Controls and Settings

Access all functions via the digital control panel on top of the unit.

Control Panel: POWER button, Humidity SET buttons (Up/Down), FAN SPEED (High/Low), MODE (Continuous/Target Humidity), TIMER (24-hour programmable), FILTER indicator light, FULL TANK indicator light.

Humidity Control: Set target humidity from 35% to 85% in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Mode Selection: CONTINUOUS for constant operation, TARGET to maintain set humidity. Timer: Program unit to turn ON or OFF after 1-24 hours. Filter Alert: Indicator light reminds when to clean the air filter (every 250 hours).

Operation Modes

Target Humidity Mode: Unit runs until set humidity is reached, then cycles on/off to maintain it. Continuous Mode: Runs constantly regardless of humidity level (use with drain hose).

1. Press POWER to turn on the unit.
2. Use UP/DOWN buttons to set desired humidity level (35-85%).
3. Press FAN button to select High or Low speed.
4. Press MODE to choose between Target Humidity or Continuous operation.
5. To use timer: Press TIMER, then UP/DOWN to set hours (1-24), press TIMER again to confirm.
6. Unit will automatically shut off when tank is full (light will illuminate).

Tip: For fastest dehumidification, use High fan speed and close windows/doors.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Unplug unit before any maintenance.
2. Empty water tank regularly: Pull tank straight out, pour water down drain, replace securely.
3. Clean air filter every 250 hours or when FILTER light illuminates: Remove filter, wash with warm water and mild detergent, air dry completely before reinstalling.
4. Clean exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
5. Clean water tank: Periodically wash with mild detergent to prevent mold/mildew.
6. End-of-season cleaning: Run unit in fan-only mode for 30 minutes to dry internal components before storage.

WARNING! Never operate without filter installed. Do not immerse unit in water.

Storage Instructions

Proper storage prevents damage during non-use periods.

1. Unplug the unit and empty water tank completely.
2. Clean air filter and let dry thoroughly.
3. Coil power cord neatly and secure with twist tie.
4. Store unit upright in a cool, dry place.
5. Cover with plastic or place in original box to prevent dust accumulation.
6. Do not store with heavy items on top of the unit.

CAUTION! Store in area where temperature remains above freezing.

Regulatory Information

This dehumidifier complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This equipment has been tested and found to comply with the limits for a Class B digital device. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Reset: Unplug unit for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com