Frigidaire CAD301NUD10 Dehumidifier Manual

The Frigidaire CAD301NUD10 is a 30-pint capacity dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features electronic controls with digital humidity readout, continuous or auto-defrost operation, automatic shut-off when tank is full, washable air filter, caster wheels for mobility, and a built-in handle for easy transport. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Water Removal Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel with digital display, 1.8-gallon water tank with full indicator, washable air filter, caster wheels, built-in handle, continuous drain port.

Feature	Description
Capacity	30 pints per day (at 80°F, 60% RH)
Control Panel	Electronic with digital humidity display and touch buttons
Water Tank	1.8-gallon removable bucket with full indicator and auto shut-off
Air Filter	Washable mesh filter for easy maintenance
Mobility	Four caster wheels and built-in carrying handle
Drain Options	Built-in continuous drain port for hose attachment
Operation Modes	Continuous, Auto, and Turbo drying modes
Auto Restart	Resumes previous settings after power interruption
Auto Defrost	Prevents coil freezing in low temperatures
Timer	24-hour programmable on/off timer

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Remove packaging: Remove all tape and protective materials from unit.
Position unit: Place on firm, level floor at least 12 inches from walls and furniture for proper airflow.
Check filter: Ensure washable air filter is properly installed.
Power connection: Plug into dedicated 115V AC, 60Hz outlet. Do not use extension cord.

WARNING! Ensure unit is upright for at least 24 hours before first use if transported on its side. Keep away from heat sources and direct sunlight.

First-Time Setup

Plug in unit; follow control panel prompts.

Set humidity level: Press HUMIDITY button to set desired RH (30%-90%).
Select mode: Choose CONTINUOUS, AUTO, or TURBO based on needs.
Check tank: Ensure water tank is properly seated and empty.
Set timer (optional): Use TIMER button to program automatic on/off cycles.

CAUTION! Do not operate without air filter installed. Ensure water tank is correctly positioned to activate auto shut-off.

Specifications

Model: CAD301NUD10
Dehumidification Capacity: 30 pints per day (at 80°F, 60% RH)
Recommended Room Size: Up to 1500 square feet
Water Tank Capacity: 1.8 gallons
Operating Conditions: 41°F to 95°F
Power Requirements: 115V AC, 60Hz, 3.7 Amps
Air Flow: 165 CFM
Noise Level: 51 dB
Dimensions: 15.4" W x 11.0" D x 19.7" H
Weight: 33.5 lbs
Refrigerant: R410A

Controls and Settings

Access all functions via electronic control panel. Front Panel: POWER, MODE, HUMIDITY, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, set point, tank full, filter clean, defrost mode, timer status.

Humidity Control: Set between 30%-90% RH in 5% increments. Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity), TURBO (maximum dehumidification). Fan Speed: HIGH or LOW. Timer: Program on/off cycles in 1-hour increments up to 24 hours. Filter Reset: Press after cleaning filter to reset reminder light.

Operation Modes

Three operation modes for different conditions.

AUTO Mode: Unit cycles on/off automatically to maintain set humidity level.
CONTINUOUS Mode: Runs continuously regardless of humidity level.
TURBO Mode: Maximum dehumidification with high fan speed for fastest moisture removal.
Defrost Mode: Automatically activates when coil temperature drops below 41°F.

Tip: Use AUTO mode for energy efficiency. Use TURBO mode when first drying out a very damp space.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean air filter: Remove and wash filter every 2 weeks or when FILTER light illuminates.
Empty water tank: Regularly check and empty tank before it reaches full capacity.
Clean exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
Clean water tank: Wash with mild detergent monthly to prevent mold/mildew.
Check drain hose: If using continuous drain, ensure hose is clear of obstructions.

WARNING! Always unplug unit before cleaning. Never immerse unit in water.

Water Removal Options

Two methods for water removal: manual tank emptying or continuous drainage.

Manual emptying: Unit automatically shuts off when tank is full. Remove tank, carry to drain, empty, and replace.
Continuous drainage: Connect 5/8" ID hose to drain port (hose not included). Ensure hose runs downward to drain.

CAUTION! When using continuous drain, ensure hose is properly secured and free of kinks. Unit must be level for proper drainage.

Care & Storage

Proper storage extends unit life.

For seasonal storage: Clean unit thoroughly, empty and dry water tank completely.
Coil storage: Run in FAN ONLY mode for 30 minutes to dry internal components.
Storage location: Store upright in dry, protected area. Cover to prevent dust accumulation.
Pre-season check: Inspect filter, power cord, and controls before next use.

CAUTION! Never store unit with water in tank. Always store in upright position.

Regulatory Information

UL Listed: Meets UL standard 474. Energy Star: Certified for energy efficiency. EPA: Compliant with refrigerant regulations. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power issue/tank full	Check power outlet; ensure tank is empty and properly seated; check circuit breaker.
Low dehumidification	Dirty filter/extreme conditions	Clean air filter; ensure room temp is between 41°F-95°F; check for closed doors/windows.
Water leakage	Tank not seated/hose issue	Ensure tank is properly positioned; check continuous drain hose for kinks/leaks.
Loud noise	Uneven surface/fan obstruction	Place on level surface; check for objects near fan intake/exhaust.
Ice on coils	Low temperature	Unit will auto-defrost; move to warmer area if below 41°F.
FILTER light on	Dirty air filter	Clean filter; press FILTER RESET button.
Error codes on display	System fault	Unplug for 10 minutes, then restart. If persists, contact service.

Reset: Unplug unit for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com