Frigidaire 66166042 Dehumidifier manual

The Frigidaire 66166042 is a high-capacity dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, washable air filter, auto-restart after power interruption, and energy-efficient operation. It is ideal for basements, living areas, and other spaces requiring moisture control. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital humidity display, Control panel, Water tank with full indicator, Continuous drain port, Washable air filter, Casters for mobility.

Feature	Description
Digital humidity display	Shows current room humidity and set point
Automatic humidity control	Maintains desired humidity level automatically
Continuous drain option	Allows connection to hose for continuous drainage
Washable air filter	Captures airborne particles; can be cleaned
Auto-restart	Resumes previous settings after power outage
Full tank alert	Indicator light and auto-shutoff when tank is full
Energy efficient	Low power consumption design
Portable design	Built-in handles and casters for easy movement
Timer function	Programmable on/off timer
Quiet operation	Low noise level for residential use

Installation

Unpack and inspect contents. Place on level, stable surface.

Remove packaging materials and protective tape.
Position unit: Place at least 12 inches from walls and furniture for proper airflow.
Check filter: Ensure air filter is properly installed.
Install casters: Attach wheels if not pre-installed.
Plug into grounded 120V AC outlet.

WARNING! Do not use extension cords. Ensure proper ventilation around the unit.

First-Time Setup

Power on dehumidifier; set initial parameters.

Set humidity level: Press HUMIDITY SET button to desired percentage (40-60% recommended).
Select fan speed: Choose HIGH or LOW setting based on needs.
Set timer (optional): Program auto on/off times using TIMER button.
Check drainage: Decide between bucket collection or continuous drain hose.
Monitor operation: Allow 24 hours to reach optimal performance.

CAUTION! Do not operate in temperatures below 41°F (5°C).

Specifications

Model: Frigidaire 66166042
Capacity: 50 pints per day (at 60°F, 60% RH)
Coverage Area: Up to 1500 sq. ft.
Humidity Control: 35% - 85% adjustable
Water Tank Capacity: 2.0 gallons
Fan Speeds: 2 (High/Low)
Power Requirements: 120V, 60Hz, 5.0A
Operating Temperature: 41°F - 95°F (5°C - 35°C)
Noise Level: ≤ 52 dB
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Full tank, Filter clean, Timer.

Humidity Control: Press HUMIDITY SET to adjust between 35-85%. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program 1-24 hours for automatic operation. Filter Reset: Press after cleaning filter to reset indicator. Auto Mode: Unit automatically adjusts operation to maintain set humidity.

Connecting Drainage

Two drainage options: Water bucket or continuous drain hose.

Bucket collection: Place bucket under drain spout; empty when full indicator lights.
Continuous drain: Remove bucket; attach 5/8" ID hose to drain port (hose not included).
Route hose: Ensure hose runs downward to floor drain or suitable outlet.
Check flow: Ensure no kinks or obstructions in hose.

Tip: For continuous drainage, unit must be level and hose must slope downward.

Operation Modes

Multiple operating modes for different needs.

Auto Mode: Maintains set humidity automatically (default).
Continuous Mode: Runs continuously regardless of humidity level.
Dryer Mode: Maximum moisture removal for wet conditions.
Energy Saver: Fan runs only when compressor runs.
Laundry Mode: Enhanced drying for laundry rooms.
Timer Operation: Set specific on/off times for energy savings.

WARNING! Do not operate in freezing conditions. Compressor may be damaged.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean air filter: Remove and wash every 2 weeks or as needed.
Empty water bucket: Clean with mild detergent monthly.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
Check drain hose: Ensure clear of obstructions if using continuous drain.
Off-season storage: Empty completely, clean, and store in dry location.

Care & Cleaning

Unplug before cleaning. Use only mild detergent and water.

CAUTION! Never immerse unit in water. Do not use abrasive cleaners. Allow all parts to dry completely before reassembly.

Regulatory Information

UL Listed. Meets ENERGY STAR® requirements. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power issue/temperature	Check power connection; ensure room temperature above 41°F.
Not removing moisture	Filter/doors/windows	Clean filter; close doors and windows; check humidity setting.
Water leaking	Bucket/hose connection	Ensure bucket properly seated; check hose connections.
Loud noise	Uneven surface/obstruction	Place on level surface; check for objects near fan.
Full light on but bucket not full	Float switch	Check float switch movement; clean if obstructed.
Ice on coils	Low temperature	Turn off; allow ice to melt; raise room temperature.
Filter light on	Dirty filter	Clean filter; press FILTER RESET button.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com